+91 94432 18566 [email protected]

Industrial Oils

Industrial Oil are lubricants which are used by various industries for the lubrication of machineries and SERVO industrial oil provide complete solution to these industries.

Compressor Oils

Food Grade Lubricants

Gear Oils

Heat Transfer oil

Hydraulic Oils

Machinery Oils

Steel Bearing Oil

Sugar Mill

Synthetics

Textile Oils

Turbine Governor fluids

Turbine Oils

Compressor Oils

Servopress oils are specially developed compressor oils, formulated with superior hydro treated base stocks, to provide satisfactory lubrication under prolonged high temperature and load conditions. These oils meet the requirement of DIN 51506 VD-L group and ISO DlS6521 specifications for air compressor oil. Servopress oils are excellent cylinder lubricants for high performance reciprocating and rotary air compressors and can be used up to 2200 C air discharge temperature.

Food Grade Lubricants

Food-grade lubricants must perform the same technical functions as any other lubricant: provide protection against wear, friction, corrosion and oxidation, dissipate heat and transfer power, be compatible with rubber and other sealing materials, as well as provide a sealing effect in some cases.

Gear Oils

Servo Gear Super oils are automotive extreme pressure gear oils blended from specially selected high viscosity index base stocks and contain additives which impart extreme pressure, anti-rust, anti-corrosion and anti oxidation characteristics.

Heat Transfer oil

Servotherm oils have been specially developed for use as heat transfer medium in industrial application. These oils possess high viscosity index, excellent thermal and oxidation stability, low volatility and low vapour pressure to give long service life in well designed heat transfer systems. Servotherm Special is recommended for well designed heat transfer system operating upto 315⁰C.

Hydraulic Oils

Servohydraulic oils are high quality antiwear type lubricants recommended for hydraulic systems and a wide variety of circulation systems of Industrial equipments. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipments having silvercoated components. These oils pass Vickers V-104C vane pump test and meet IS: 10522-1983 (Reaffirmed 2004).

Machinery Oils

Servoline oils provide good oiliness for general lubrication of machinery even under boundary lubrication conditions. These products maintain a thin film of oil under light and medium loads and provide protection against corrosion and rust even during idle periods. Servoline oils are recommended for all types of industrial machinery using once-through lubrication systems. Also recommended for use in the lubrication systems of machine tools, textile machinery and other machine parts which are lubricated by a thin film of oil.

Steel Bearing Oil

Servosteel oils are premium quality bearing oils possessing superior oxidation and thermal stability. These oils separate from water quickly and have excellent film strength property to minimise wear in roll-neck bearings of steel mills. Servosteel oils meet requirements of Morgoil bearing lubricant specified by Morgan Construction Co., U.S.A. These oils fully meet performance requirements of IPSS: 1-09-001-81.

Sugar Mill

Servo SM oils are recommended for then lubrication of sugar mill crusher and mill-roll bearings. These oils are generally applied by means of mechanical force feed lubricators. In certain industries, these grades are used in centralised lubrication system of slow speed spur and helical gears and for slush pan lubrication of open gears.

Synthetics

Servosynco E oils are an excellent synthetic compressor oils for lubrication of air compressors with various Viscosity grades. However, Servosynco E series recommended for Rotary Screw Compressors, Vane Air Compressors and cylinder lubrication of Reciprocating compressors. These grades are an excellent choice when extended drain intervals are desired.

Textile oils

Our range of servo textile oil is highly effective in improving the antistatic properties and also helps in reducing the friction of the machines parts. These servo textile oils offered by us also facilitate the washing out of the lubricant especially in wet finishing operations. It is highly effective in improving the antistatic properties as well as in reducing the friction of the machines parts. Our range of textile oil is available in different industrial grades at highly competitive prices.

Turbine Governor fluids

Servosynturbo GF 46 is a new generation electro hydraulic fluids recommended for use in governor control systems of steam turbines. This fire resistant turbine governor fluid is phosphate ester based, providing highest fire resistance with excellent lubrication and self extinguishing characteristics.

Turbine Oils

Servoprime oils are premium turbine oils formulated with superior quality hydrotreated base stocks and possessn exceptional thermal and oxidation stability, nexcellent demulsibility, air release property and resistance to foaming. These oils meet IS: 1012-2002, BS 489, General Electric GEK27070, Siemens (KWU) spec. TPS 9013 04 (KWU), GEK 28143A, GEK 32568C, GEK 101941A (for Servoprime 32) & GEK 32568A for Gas Turbine (for Servoprime 32) and BHEL turbine oil requirements. Servoprime oils provide long service life and are recommended for lubrication of steam, gas and hydraulic turbines and can be used in hydraulic systems requiring long life lubricant of outstanding properties.